CONCRETE STONE CLEANER
Special acid-containing cleaning agent.
Using this agent, we can easily remove cement film, cement residues, nitrate traces, mortar residues, rust and limescale deposits, algae, seaweed.
Can be used on: acid-resistant natural stone, artificial stone, concrete, clinker bricks, ceramics, glazed tiles and paving slabs.
You can order here: 
Storage:
Store in a dry, cool, well-ventilated place, away from direct sunlight, above 0 oC. Keep away from incompatible materials (oxidizing agents, hypochlorite-containing cleaning agents, alkaline materials, cyanides, sulfides, formaldehyde), heat and sources of ignition.
Application:
Slightly moisten the surface to be cleaned, then apply CONCRETE STONE CLEANER undiluted with a brush or sponge.
Let the product work on the surface for a few minutes, then scrub the surface with a wet brush. Repeat the procedure if necessary.
Make sure that the product does not dry on the surface. Rinse the cleaned surface with plenty of water.
Always test the product's compatibility with the surface to be treated in a less visible area before use!
Do not clean acid-sensitive surfaces with it. Do not use it to clean aluminum, anodized aluminum, marble, enamel, limestone!
After successful treatment, depending on whether the surface is exposed to oil contamination or not, it is recommended to impregnate the cleaned surface with our oil-repellent pavement stone impregnationtombstone cleaner - CONCRETE STONE PROTECTOR MAX or pavement stone impregnation - CONCRETE STONE PROTECTOR product.
Wear rubber gloves and safety glasses during work!
Caution: The surface to be treated must not be overheated!
Treatment temperature: 10-30 oC.
zoom = click
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
You can order here:
Safety Data Sheet reach
|
|