STOMBSTONE PROTECTOR
Tombstone and monument impregnation
TOMBSTONE PROTECTOR is an ideal, high-performance impregnation agent for the protection of tombs, crypts, monuments, and statues.
After cleaning the surface, the material applied in two layers prevents algae, moss, dirt, and winter frost damage for years.
We recommend using it on concrete, artificial stone, plastered surfaces, brick, natural stone, and, with some trials, marble.
Important: Not suitable for treating objects made of plaster!
Warning: The product contains solvents!
Before successful treatment, if the surface is already dirty, algae-covered, or moss-covered, the surface must be cleaned.
We recommend our DRY-CLEANING tombstone and monument cleaner - TOMBSTONE CLEANER, developed for this purpose.
You can order here: 
Storage:
TOMBSTONE PROTECTOR can be stored in its original, closed container at temperatures between 0 and 30 oC for at least 24 months from the date indicated on the label. If the product's shelf life has expired, the material may still be good, which must be confirmed by a preliminary test.
After opening, the material must be stored hermetically sealed, as the material reacts with the humidity of the air.
Application:
It is recommended to apply TOMBSTONE PROTECTOR to the surface to be treated by pouring or by spraying with large droplets (the material should flow on the surface) in at least two layers. The next layer must always be applied before the first layer dries ("wet-on-wet" method)!
The surface must be dry to the touch. The appropriate amount depends on the absorbency of the surface.
Always carry out a test treatment on the surface to be treated. This way you can calculate, for example, the desired amount of material.
Practical consumption:
For a single tombstone made of artificial stone/granite: 2/1,5 liters
For a double tombstone made of artificial stone/granite: 2/3 liters
Important: Carefully cover windows and non-absorbent surfaces before application, as the product sets so quickly that it is very difficult or impossible to remove. If it splashes on glass, wash it immediately with soapy water or, if necessary, with a solvent.
Caution: The surface to be treated must not be too hot!
Processing temperature: 10-30 oC.
Impregnated tombstone (artificial stone)
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
Safety Data Sheet reach
|
|