TOMBSTONE CLEANER
Tombstone and monument cleaner
With the help of TOMBSTONE CLEANER, we can clean the tombstones of our loved ones, monuments, and statues.
It cleans the surfaces from moss, algae, dirt, and removes graying.
It can be used on concrete, artificial stone, granite, marble, and limestone.
If necessary, perform the treatment several times.
Always test the product in a less visible area before application!
If you want the surface to remain clean for a long time, after successful treatment, depending on the surface, it is recommended to impregnate the cleaned surface with one of our AQUA STOP W products (e.g.: tombstone and monument impregnator - TOMBSTONE PROTECTOR).
Storage:
Store in a dry, cool, well-ventilated place, away from direct sunlight. Keep away from incompatible materials (acids, acidic cleaning agents), heat, and sources of ignition.
Shelf life in original, unopened packaging: 12 months at temperatures between 0-35 oC .
Application:
Apply the TOMBSTONE CLEANER undiluted to the surface to be cleaned with a brush, spray bottle or sponge.
Let the product work on the surface for a few minutes, then scrub the surface with a wet brush. Repeat the procedure if necessary.
Rinse the cleaned surface with plenty of water.
Practical consumption:
For a single tombstone made of artificial stone/granite: 2 liters
For a double tombstone made of artificial stone/granite: 3 liters
Make sure that the product does not dry on the surface!
Always check the compatibility of the product with the surface to be treated in a less visible place before use!
Warning: Do not use in combination with other products, as dangerous gas (chlorine) may be released.
Attention: Use on monuments or buildings of a historical nature only at your own risk.
Caution: The surface to be treated must not be overheated!
Treatment temperature: 10-30 oC.
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
Safety Data Sheet reach
|
|