ROOFTOP CONCRETE ROOF
Concrete tile impregnation
Concrete tile impregnation - ROOFTOP CONCRETE ROOF is an excellent water repellent, even for highly alkaline surfaces such as concrete tiles. Its special composition provides decades of protection for concrete tiles.
Thanks to its active ingredient content, concrete tiles do not stain, become dirty or grow algae. The water repellent effect does not deteriorate significantly even if it rains shortly after application.
The agent significantly reduces the building material's ability to absorb water through capillary action, but does not clog pores or capillaries.
You can order here: 
Storage:
The product can be stored in its original, closed container at 0-30 oC for at least 24 months from the date indicated on the label.
If the product's shelf life has expired, the material may still be usable, which must be confirmed by a preliminary test.
During storage, surface creaming may occur, which disappears after brief shaking or stirring and the material remains unchanged in its properties! The material contains a preservative against mold.
Application:
The material does not need to be diluted!
The concrete tile should be dipped into the diluted material for 2 minutes so that the tiles are always covered by the liquid, then after a short drying period the tile can be placed on the roof. The continuously consumed material must be constantly replaced.
During subsequent treatment, the tile should be thoroughly cleaned (e.g. with MOSS and ALGAE REMOVER, then with a steam razor) and after drying, the treatment can be carried out by sprinkling with a backpack sprayer (spraying is NOT PROHIBITED!).
It is recommended to apply the material to the surface to be treated in two layers by pouring or large-drop spraying. The second layer should always be applied before the first layer dries ("wet-on-wet" method).
The material consumption for a two-layer treatment of 1 m2 is 0.4-0.7 liters per square meter.
The practical average: 0.5 liters/m2.
Always perform a test treatment on the surface to be treated. This way, you can calculate, for example, the desired amount of material.
Thanks to a special ingredient in concrete tile impregnator - ROOFTOP CONCRETE ROOF, any subsequent treatment can be carried out without any further difficulties.
The product must NOT be sprayed (it must be sprinkled)!
Attention: The surface to be treated must not be overheated!
Application temperature:10-30 oC.
Safety measures:
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
Safety Data Sheet reach
|
|