MOSS AND ALGAE REMOVER
MOSS and ALGAE REMOVER uses the power of active chlorine to clean algae-covered, moss-covered surfaces with great efficiency.
It is excellent for cleaning monuments, statues, tombstones, and other outdoor artifacts made of natural or artificial materials.
Always test the product in a less visible area before use!
After successful treatment, depending on the surface, it is recommended to impregnate the cleaned surface with one of our AQUA-STOP W products (e.g. TOMBSTONE PROTECTOR).
Storage:
Store in a dry, cool, well-ventilated place, away from direct sunlight. Keep away from incompatible materials (acids, acidic cleaning agents, heat, ignition sources).
12 months in original, unopened packaging at temperatures between 0-35 oC.
Application:
Apply MOSS and ALGAE REMOVER undiluted to the surface to be cleaned with a brush, spray bottle or sponge.
Let the product work on the surface for a few minutes, then scrub the surface with a wet brush. Repeat the procedure if necessary.
Make sure that the product does not dry on the surface. Rinse the cleaned surface with plenty of water.
Always check the compatibility of the product with the surface to be treated in a hidden place before use!
Use rubber gloves and safety glasses during work!
Caution!
Do not use in combination with other products, as dangerous gas (chlorine) may be released.
Caution: Use on a listed building or a building of a listed building only at your own risk.
Caution: The surface to be treated must not be overheated!
Treatment temperature: 10-30 oC.
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
Safety Data Sheet reach
|
|