NITRATE REMOVER
NITRATE REMOVER is a highly effective cleaning agent that removes nitrate precipitated on the surface of building materials.
It can also be used on surfaces that are less sensitive to acid. By using it, we can regain the original, natural color and character of the treated surface.
It also removes cement film left after grouting from tiled and paved surfaces.
Always test the agent in a less visible place before use!
After successful treatment, depending on the surface, it is recommended to impregnate the cleaned surface with one of our AQUA STOP W products (e.g.: WALL BRICK PROTECTOR).
You can order here: 
Storage:
Store in a dry, cool, well-ventilated place away from direct sunlight. Shelf life 24 months.
Keep away from incompatible materials (oxidizing agents, hypochlorite-containing cleaning agents, alkaline materials, cyanides, sulfides, formaldehyde), heat, and sources of ignition.
Application:
Clean the surface to be cleaned from efflorescence (dusty surface) with a brush or broom, then apply the NITRATE REMOVER undiluted with a brush or sponge.
Let the agent work on the surface for a few minutes, then scrub the surface with a wet brush. Repeat the procedure if necessary.
Rinse the cleaned surface with plenty of water.
Make sure that the agent does not dry on the surface.
Always check the compatibility of the agent with the surface to be treated in a less visible place before use!
Do not clean surfaces that are particularly sensitive to acid with it.
Do not use it to clean aluminum, anodized aluminum, marble, enamel, limestone!
Caution: The surface to be treated must not be overheated!
Treatment temperature: 10-30 oC.
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
You can order here:
Safety Data Sheet reach
|
|