STONE SHINE
Stone varnish
Specially formulated agent containing silicone varnish.
Makes the treated surface water-repellent and UV-resistant.
The material gives the treated surface a shiny, "water-shiny" effect.
It can be applied - in at least two layers - with a brush or sprayer. The treatment can be repeated several times for the desired effect.
Always perform a test treatment before treatment!
Attention: The product contains solvents, therefore it should only be used in closed areas with intensive ventilation.
WITH THE USE OF THE PRODUCT, THE VAPOR-PERMEABILITY OF THE SURFACE WILL SIGNIFICANTLY DECREASE, OR MAY EVEN CANCEL IT!
Recommended application surface: partitions, counters, decorative surfaces.
You can order here: 
Storage:
STONE SHINE stone polish can be stored in its original, closed container between 0-30 oC, away from sunlight, for at least 24 months from the date indicated on the label. If the product's shelf life has expired, the material may still be good, which must be confirmed by a preliminary test.
Application:
STONE SHINE stone varnish should be applied undiluted. It is recommended to apply the material to the surface to be treated in two layers by pouring, brushing or large-drop spraying (the material should flow on the surface). The second layer must always be applied before the first layer dries ("wet-on-wet" method)!
The surface to be treated must appear dry to the eye.
The material requirement depends on the absorbency of the surface: 0.1 - 1 l/m2
Always carry out a test treatment on the surface to be treated! This way we can calculate and check, for example, the desired amount of material or the effectiveness of the agent.
Attention: You can use it on a monument or a monument-like building only at your own risk.
Caution: The surface to be treated must not be overheated!
Treatment temperature:10-30 oC.
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
Safety Data Sheet reach
|
|