STONE BALSAM
STONE BALSAM wonderfully brings out the patterns of dark-colored stones.
By using it, we achieve an effect as if the surface of the stone was constantly wet: it deepens the color of the stone, highlights the smallest patterns of the stone.
By using the agent, the surface of the stone becomes water-repellent, thus protecting the surface from damage caused by water.
The material must be applied to the surface without dilution, in at least two layers. Multiple treatments can provide an even more wet effect.
In any case, we should carry out a test treatment!
Attention: The product contains solvents, therefore it should only be used in closed areas with intensive ventilation!
You can order here: 
Storage:
STONE BALSAM should be stored in its original, closed container at a temperature between 0-30 oC, away from sunlight. It can be stored for at least 24 months from the date indicated on the label. If the product's shelf life has expired, the material can still be used, this can be confirmed by a preliminary test.
Application:
STONE BALSAM should be used undiluted. The surface to be treated must be dry to the touch!
It is recommended to apply it to the surface to be treated with a brush or spray. The application should be repeated as many times as necessary until the desired color depth is achieved.
Coverage:
1 liter of material is sufficient for 5-10 m2 of stone surface, one layer.
In the case of very porous, porous stones, the material requirement can reach 0.5-1 liter/m2.
Always carry out a test treatment on the surface to be treated! This way we can calculate and check, e.g., the desired amount of material or the effectiveness of the agent.
Attention: You can use it on a monument or a monument-like building only at your own risk.
Caution: The surface to be treated must not be overheated!
Treatment temperature: 10-30 oC.
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
Safety Data Sheet reach
|
|