MOLD REMOVER
With MOLD REMOVER, thanks to its active ingredient, we can easily clean moldy surfaces.
It is excellent for removing mold stains indoors and outdoors.
Always test the product in a less visible area before use!
After successful treatment, depending on the surface, it is recommended to impregnate the cleaned surface with one of our products (e.g.: WALL PROTECTOR).
Storage:
Store in a dry, cool, well-ventilated place, away from direct sunlight. Keep away from incompatible materials (acids, acidic cleaning agents, heat, ignition sources).
12 months in original, unopened packaging at temperatures between 0-35 oC.
Application:
Apply MOLD REMOVER undiluted to the surface to be cleaned with a brush, spray bottle or sponge.
Let the product work on the surface for a few minutes, then wipe the surface with a wet sponge or cloth. Repeat the procedure if necessary.
Make sure that the product does not dry on the surface. Rinse the cleaned surface with plenty of water.
Spray the product onto the mold-free surface and let it dry for long-term prevention.
Spray regularly moldy areas with the product every 1-2 months for prevention.
Always check the compatibility of the product with the surface to be treated in a hidden place before use!
Wear rubber gloves and safety glasses during work!
Warning!
Do not use in combination with other products, as dangerous gas (chlorine) may be released.
Warning: Use on monuments or buildings of a historical nature only at your own risk.
Caution: The surface to be treated must not be overheated!
Treatment temperature: 10-30 oC.
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
You can order here: 
Safety Data Sheet reach
|
|