MARBLE PROTECTOR
Marble and granite impregnation
MARBLE PROTECTOR is the ideal impregnation agent for marble and granite surfaces.
By using it, we can prevent water from being absorbed into the surface, so it will not stain or get dirty.
Storage:
MARBLE PROTECTOR can be stored in its original, closed container at temperatures between 0 and 30 oC for at least 24 months from the date indicated on the label. If the product's shelf life has expired, the material may still be good, which must be confirmed by a preliminary test.
After opening, the material must be stored hermetically sealed, because the material reacts with the humidity of the air.
You can order here:
Application:
It is recommended to apply MARBLE PROTECTOR to the surface to be treated with a brush or a soft cloth (the material should flow onto the surface) in at least two layers. The next layer must always be applied before the first layer dries ("wet-on-wet" method)! The surface must be dry to the touch. The appropriate amount depends on the absorbency of the surface.
Always carry out a test treatment on the surface to be treated. This way, you can calculate, for example, the desired amount of material.
Carefully wipe off any excess amount that is not absorbed with a soft cloth, because drying directly on the surface causes stains!
Material consumption: 0.05-0.1 liters/m2
Important: Before application, carefully cover windows and non-absorbent surfaces, as the product sets so quickly that it is very difficult or impossible to remove. If it splashes on glass, wash it off immediately with soapy water or, if necessary, with a solvent.
Caution: The surface to be treated must not be overheated!
Treatment temperature: 10-30 oC.
Safety measures:
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
Safety Data Sheet reach
|
|