YACHT CLEANER
- Cleaning plastic and gelcoat surfaces on yachts, motorboats and sailboats.
- Removing soiling from deck metal rails, fittings, ladders and handholds.
- Gentle cleaning of untreated or woodstained wooden surfaces (benches, decking).
- Pre-cleaning to remove limescale, algae films and oily deposits before further treatment.
Yacht Cleaner an eco-friendly, specialised cleaner.
With this product you can easily remove dirt and deposits from plastic, metal and wood surfaces on boats and yachts.
It is suitable for cleaning algae-contaminated surfaces below the waterline and for removing residues of antifouling coatings.
Recommended surfaces: plastic and metal surfaces, and treated wooden surfaces on the hull and deck.
Remove stubborn dirt and heavy deposits (for example shells or thick algae films) mechanically first. The surface may be slightly damp.
Apply Yacht Cleaner undiluted with a sprayer, brush or sponge. Leave it to work briefly.
Work the surface with a wet brush or sponge to loosen dirt and coating residues.
Rinse thoroughly with plenty of water. For heavier soiling, repeat the process.
Actual consumption depends on the level of soiling and the surface texture.
As a general guideline, plan for about 5–10 square metres per litre per cleaning cycle.
On heavily soiled, algae-covered or oily surfaces, consumption may be higher, especially if repeated treatments are required.
Store the product in a dry, cool and well-ventilated place, protected from direct sunlight.
In the original, unopened packaging it is typically stable for at least 24 months when stored between 0 and 35 degrees Celsius.
When using the product, wear protective gloves and safety goggles. If splashed on skin, rinse immediately with plenty of water. If it gets into the eyes, rinse immediately and seek medical advice if necessary.