CAST STONE PROTECTOR
Artificial stone impregnation
CAST STONE PROTECTOR - Artificial stone impregnation it is ideal for impregnating artificial stone surfaces.
Its active ingredient significantly reduces the building material's ability to absorb water through capillary action, but does not clog pores or capillaries. Therefore, the change in the breathing of the building material is slight or barely noticeable and measurable.
CAST STONE PROTECTOR - Artificial stone impregnation excellent water repellent, impregnating agent.
Not suitable for making gypsum water repellent! Not suitable for solvent sensitive materials (nikecell, styrofoam, bitumen, etc.)!
You can order here:
Storage:
CAST STONE PROTECTOR - Artificial stone impregnation in original, closed container at 0-30 0C for at least 24 months from the date indicated on the label. If the product's shelf life has expired, the material may still be good, which must be confirmed by a preliminary test.
After opening, the material must be stored hermetically sealed, because the material reacts with the humidity of the air.
Application:
CAST STONE PROTECTOR - Artificial stone impregnation it is recommended to apply the product to the surface to be treated in at least two layers with a brush or by spraying with large droplets (the product should flow on the surface). The next layer must always be applied before the first layer dries ("wet-on-wet" method)! The surface must be dry to the touch. The appropriate amount depends on the absorbency of the surface.
Always carry out a test treatment on the surface to be treated. This way, you can calculate, for example, the desired amount of product.
Carefully wipe off any excess amount that is not absorbed with a soft cloth, as drying directly on the surface will cause stains!
Consumption: 0.3-0.5 liters/m2
Important: Before application, carefully cover windows and non-absorbent surfaces, as the product sets so quickly that it is very difficult or impossible to remove. If it splashes on glass, wash it immediately with soapy water or, if necessary, with a solvent.
Caution: Use on monuments or buildings of a historical nature only at your own risk. Before use, be sure to call the phone number below for expert advice!
Caution: The surface to be treated must not be overheated! Treatment temperature: 10-30 0C.
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
You can order here:
Safety Data Sheet reach
|
|