BRICK CLEANER gently removes cement and grout residues and any nitrate residue from the surface of the facing bricks.
After its application, the surface regains its natural color and character, the veiled color disappears, and the color change caused by the grouting material disappears.
After successful treatment, in order to prevent salt efflorescence and nitrate deterioration, we recommend treating the surface with one of our AQUA-STOP W products (e.g.: BRICK PROTECTOR).
You can order here: 
Storage:
Store in a dry, cool, well-ventilated place away from direct sunlight. Shelf life 24 months.
Keep away from incompatible materials (oxidizing agents, hypochlorite-containing cleaning agents, alkaline materials, cyanides, sulfides, formaldehyde), heat, and sources of ignition.
Application:
Apply the BRICK CLEANER undiluted to the surface to be cleaned with a brush or sponge.
Let the product work on the surface for a few minutes, then scrub the surface with a brush. Repeat the procedure if necessary. Make sure that the product does not dry on the surface.
Rinse the cleaned surface with plenty of water.
Always check the compatibility of the product with the surface to be treated in a less visible place before use!
Do not clean surfaces sensitive to acids with it.
Do not use it to clean aluminum, anodized aluminum, marble, enamel, limestone!
Use rubber gloves and safety glasses during work!
Attention: You can use it for a monument or a monument-like building only at your own risk.
Caution: The surface to be treated must not be overheated! Treatment temperature: 10-30 oC.
Safety measures:
Use rubber gloves and safety glasses during work!
The "Safety Data Sheet" can be obtained from the manufacturer or the dealer.
Safety Data Sheet reach
|
|